AD20-05H-A01
Features
This is a general-purpose servo module compatible with Futaba’s proprietary S.BUS protocol.
Using the optional CIU-3, users can change the default operating angle and configure free or hold settings.
The module is recommended for applications requiring frequent replacement or cost-sensitive designs.
Specification
| Model Name | AD20-05H-A01 |
|---|---|
| Rated Voltage [V] | 6.0 |
| Rated Torque [N⋅m] | 0.12 |
| Maximum Torque (Peak) [N⋅m] | 0.40 |
| No-Load Speed [min-1] | 53 |
| Housing Material | IP40 |
| Housing Material | Upper: Resin Middle: Resin Bottom: Resin |
| Gear Material | 1st: Resin 2nd: Resin 3rd: Resin Final: Resin |
| Cable type | Fixed Non-Shielded Cable |
| Cable Length | 300 mm (11.81 in) |
| Connector | 3-pin connector |
| Dimensions (W×L×H) | 40.5 mm × 20.0 mm × 36.1mm (1.59 in × 0.79 in × 1.42 in) |
| Control and Communication Specifications | PWM / S.BUS / S.BUS2 |
| Operating Temperature | -20 to +60°C (-68 to +140°F) |
| Weight [g] | 36.0 |
| Specification |  |
- Control and Communication Standards
To support connection with Futaba RC receivers and various other controllers, the following communication standards are supported:- PWM: PWM signals used in conventional hobby RC servos
- S.BUS: Futaba’s proprietary serial
For detailed specifications, including CAD data, please refer to the download page.
