Precision mini Plate
6sides precision milled
Dimensional allowance of W, L and T
| L | ||
|---|---|---|
| 50 or more and up to 400 |
More than 400 |
|
|
Allowance of |
＋0.2 ～ ＋ 0.3 | ＋0.2 ～ ＋ 0.4 |
Uniformity of thickness (T)
| L | ||
|---|---|---|
| Less than 100 | 100 or more and up to 500 |
|
| Tolerance | 0.02 | 0.02 per 100mm |
Flatness of both faces of T
| T | L | |
|---|---|---|
| Less than 100 | 100 or more and up to 500 |
|
| 5 or more and up to 15 | 0.050 | 0.050 per 100mm |
| More than 15 and up to 25 | 0.030 | 0.030 per 100mm |
| More than 25 and up to 40 | 0.020 | 0.020 per 100mm |
| More than 40 and up to 60 | 0.015 | 0.015 per 100mm |
Squareness of reference plane
| L | ||
|---|---|---|
| Less than 100 | 100 or more and up to 500 |
|
| Tolerance | 0.015 | 0.015 per 100mm |
Chamfer all around
C up to 0.2
4 sides precision milled and 2 sides(Top and Bottom) rotary ground (option)
Dimensional allowance of W,L and T
| L | ||
|---|---|---|
| 50 or more and up to 400 |
More than 400 and up to 500 |
|
| Allowance of W,L and T | ＋0.2 ～ ＋ 0.3 | ＋0.2 ～ ＋ 0.4 |
| Allowance of T | 0 ～ ＋0.1 | 0 ～ ＋0.2 |
Uniformity of thickness (T)
| L | ||
|---|---|---|
| Less than 100 | 100 or more and up to 500 |
|
| Tolerance | 0.012 | 0.012 per 100mm |
Flatness of both faces of T
| T | L | |
|---|---|---|
| Less than 100 | 100 or more and up to 500 | |
| 5 or more and up to 15 | 0.030 | 0.030 per 100mm |
| 15 or more and up to 25 | 0.020 | 0.020 per 100mm |
| 25 or more and up to 40 | 0.015 | 0.015 per 100mm |
| 40 or more and up to 60 | 0.010 | 0.010 per 100mm |
Squareness of reference plane
| L | ||
|---|---|---|
| Less than 100 | 100 or more and up to 500 |
|
| Tolerance | 0.015 | 0.015 per 100 |
Chamfer all around
C0.2