Specification/selection
Specification/selection
| Specification | 2-plates type | 3-plates type | ||||
|---|---|---|---|---|---|---|
| S series | D/E series | F/G series | H series | |||
| Standard specification | Thickness selection | Dimension A | 〇 | 〇 | 〇 | 〇 |
| Dimension B | 〇 | 〇 | 〇 | 〇 | ||
| Dimension U | 〇 | 〇 | 〇 | 〇 | ||
| Dimension C | 〇 | 〇 | 〇 | 〇 | ||
| Mounting plate specification | 〇 | 〇 | 〇 | 〇 | ||
| Guide specification | 〇 | 〇 | 〇 | |||
| Ejector plate specification | 〇 | 〇 | 〇 | 〇 | ||
| Support pin specification | 〇 | |||||
| Support pin length | 〇 | 〇 | 〇 | |||
| Puller bolt length | 〇 | |||||
| Option specification | Thickness selection | Dimension R | 〇 | 〇 | 〇 | |
| Dimension S | 〇 | 〇 | 〇 | 〇 | ||
| No screw hole for Eyebolt | 〇 | 〇 | 〇 | 〇 | ||
| No hole for Ejector rod | 〇 | 〇 | 〇 | 〇 | ||
| Material change | 〇 | 〇 | 〇 | |||
Plate accuracy of mold base (template, ejector plate and the other plates)
*The surface roughness sign in the above figure is arithmetic mean roughness (Ra).
Material
S50C(up to 25mm thick)
S55C(30mm thick or more)
Dimensional allowance of T
|
L - dimension(mm) |
Dimensional allowance of T (mm) |
|---|---|
| Up to 300 | +0.1 to +0.2 |
| More than 300 and up to 600 | +0.15 to +0.25 |
| More than 600 and up to 1150 | +0.2 to +0.3 |
Uniformity of thickness (T)
0.008 per 100mm
Flatness of both faces of T
| |
Dimensional - L (mm) | ||
|---|---|---|---|
| Up to 300 | More than 300 and up to1150 |
||
| Dimensional - T (mm) |
5 or more and up to 10 | 0.020 | 0.040 |
| More than 10 and up to 20 | 0.015 | 0.020 | |
| More than 20 up to 40 |
0.010 |
0.015 | |
| More than 40 up to 350 | 0.008 | 0.010 | |
Squareness of reference plane
0.008 per 100mm
Spacer block
* The surface roughness sign in the above figure is arithmetic mean roughness (Ra).
Material
SS400 or more than equivalent
Uniformity of thickness of (T)
0.008 per 100mm
Variation of T in a pair of plates
0.02