specification
Specification Model |
Model |
|||||||
---|---|---|---|---|---|---|---|---|
AFE-40 |
AFE-65 |
AFE-80 |
AFE-100 |
AFE-150 |
AFE-200 |
AFE-250 |
||
Maximum Material width(mm) |
40 |
65 |
80 |
100 |
150 |
200 |
250 |
|
Material thickness(mm) |
0.1~0.8 |
0.1~1.0 |
0.1~1.2 |
0.1~1.5 |
0.1~2.0 |
0.2~2.0 |
0.2~2.0 |
|
Material width for maximum material width (mm) |
40 |
65 |
80 |
100 |
120 |
150 |
150 |
|
Material thickness for maximum material width (mm) |
0.8 |
1.0 |
1.2 |
1.5 |
1.6 |
1.5 |
1.2 |
|
Maximum feed length (mm) |
50 |
80 |
80 |
130 |
150 |
200 |
200 |
|
Fixed clamp force |
(N) |
147 |
215 |
215 |
372 |
637 |
637 |
637 |
Moving clamp force |
(N) |
245 |
372 |
392 |
705 |
1029 |
1372 |
1372 |
Feed force(N) |
Push Feed Type |
98 |
156 |
196 |
196 |
284 |
284 |
284 |
Pull Feed Type |
53 |
58 |
117 |
117 |
191 |
191 |
191 |
|
Lubrication |
Turbine oil class(ISO VG32)It can be used without lubrication. |
|||||||
Required air pressure(MPa) |
0.4~0.5(4~5kgf/cm2) |
|||||||
Maximum air consumption(l/min) |
45 |
50 |
75 |
80 |
120 |
170 |
150 |
|
Apparent power AC (VA) |
Starting |
4.5/50Hz・4.2/60Hz |
5.6/50Hz・5.0/60Hz |
|||||
Excitation |
3.5/50Hz・3.0/60Hz |
3.4/50Hz・2.3/60Hz |
||||||
Power consumption DC (W) |
2.1 |
1.8 |
||||||
Weight (kg) |
5.5 |
7.0 |
11 |
17.5 |
35 |
50 |
60 |
|
Revolution at maximum feed length (SPM) |
200 |
130 |
150 |
100 |
80 |
70 |
60 |
|
Double solenoid specification Revolution at maximum feed length(SPM) |
— |
— |
— |
— |
70 |
65 |
55 |
|
Feed accuracy (mm) |
±0.05 |
|||||||
Ambient temperature (℃) |
5~45 |
|||||||
Storage temperature(℃) |
−10~50 |
|||||||
Shock proof/Vibration proof(G) |
15/5(50Hz~1kHz) |
|||||||
Standard accessories |
Air tube(2m),joint(R1/4),tool,mounting bolt,distribution cable |
Note1:Feed accuracy and revolution at maximum feed length are the value measured under our test conditions.Depending on material,mold,peripheral device ,and feed condition,they may be below or exceed the specified range.
Note2:The amount of apparent power and power consumption is the value per solenoid valve.
Note3:Air requires lubrication when pilot valve operation is selected.20-55mm stroke length of press machine is required.
Note4:Fixed clamp force , moving clamp force and feed force are measured when air pressure is 0.4MPa.