Main Menu
Sub Menu
Contents

In-Cavity resin temperature measuring system

  • Simultaneous measurement of 4channels
  • Outputs voltage of 1V per 100°C,and can be used by combining with measuring instrument and control device.
  • Realizes 1msec sampling speed to support high injection filling
  • Unique sensor sensitivity adjustment system eliminates troublesome calibration work.

Specifications

Amplifier main unit

Product name EPT-001S
Number of measurement points 4 channels
Analog voltage output Optical voltage 1V output per 100°C
Output impedance 100Ω
Accuracy ±2%F.S.
Sampling rate 1ms
Measurement range 60~430°C*
Power supply Spec. Power supply method Use a dedicated AC adapter
Maximum power consumption 10VA
Environment resistance Operating temperature 10~40°C
Operating humidity 35~85%(No condensation)
Vibration resistance 10 to 55Hz multiple-amplitude 1.5mm
2hours in each direction of X, Y and Z
Sensor sensitivity setting Input with a key switch on the panel
Weight Approx. 800g
Supplied accessories AC adapter

*60 to 430°C for ejector pin type resin temperature sensors and 60 to 390°C for flash-mount type resin temperature sensors

Specifications

Specifications

Pre-amplifier

Pre-amplifier
Product name EPT-JB001
Sensor input Appicable sensor Resin temperature sensor
(Futaba EPSSZL and EPSSZT series)
Communication vable length 2m
Environment resistance Operating tenperature 10~40°C
Operating humidity 35~85%(No condensation)
Vibration resistance 10 to 55Hz multiple-amplitude 1.5mm 2hours in each direction of X, Y and Z

Specifications

Product name Order product name
BNC voltage output cable 1M EPT-VC 01M
BNC voltage output cable 2M EPT-VC 02M